7% AHP Indicator Test Strips are easy to use dip-and-read reagent strips for semi-quantitative determination of hydrogen peroxide concentration in AHP disinfectant solutions for variety of applications.
Reaction of the AHP Test is based on a proprietary coupling system where the AHP reacts with an iodide salt and a coupler to form a brown coloured complex. Accelerated Hydrogen Peroxide (AHP) indicator test strips are used for confirming that the disinfection solution has been correctly diluted prior to its use to ensure the solution is doing its job as a sanitizer, disinfectant or sterilant.
• Test strip to be used on Accel CS20 Solution • Easy to use monitoring system • Quickly determines if the correct concentration of Hydrogen Peroxide is present • 12-month shelf life (3 months if opened)
Accelerated Hydrogen Peroxide (AHP) Indicator Test Strips are easy to use dip-and-read reagent strips for a pass or fail determination of hydrogen peroxide concentration in AHP disinfectant solutions for variety of applications.
Dip the strip into the test solution for one second, making sure that the reagent pad is fully wet. Gently shake off the excess solution. Wait for 60 seconds then compare the colour on the reagent pad with the reference colour block. If the colour on the reagent pad is lighter than the reference colour block for a “PASS”, then the concentration of hydrogen peroxide is below the minimum recommended concentration for the AHP solution and should be discarded. “FAIL” colour blocks are provided only for reference and should not be used for measuring or quantifying the level of hydrogen peroxide in the AHP solution.
A high level disinfectant and sterilant for processing heat sensitive semi-critical and critical medical devices and instruments for which heat sterilization is not suitable. The exceptional safety profile means there is no special ventilation required. PREempt HLD5’s active Hydrogen Peroxide is environmentally preferable (breaks down into water and oxygen, leaving no active ingredient residue).
5-minute high level disinfection 14-day reusable solution
Designed for use on heat sensitive semi-critical & critical devices.
Virucidal: 5 Min., Poliovirus, Sabin strain type 1, which allows for a Broad-Spectrum Virucide claim against most enveloped and non-enveloped viruses
PREempt Concentrate Disinfectant Solution works fast for large areas to ensure user, protocol and product compliance with fast contact times and broad-spectrum efficacy. The concentrated formula requires dilution and is cost effective for large surfaces.