Three-way with two female luer lock ports and one SPIN-LOCK connector, port covers. DEHP-free, Latex-free. Priming volume: 0.26 mL

BD PosiFlush™ is a range of ready-to-use sterile pre-filled flush syringes containing sodium chloride (NaCL) 0.9%, specifically designed to enhance best clinical practice. Posiflush XS is externally sterile

• All BD PosiFlush™ syringes have a consistant 10mL syringe diameter to prevent cannula damage and assure compliance flushing with a 10mL diameter syringe.
• BD PosiFlush™ eliminates syringe induced blood reflux, enhancing cannula maintenance protocol and extending the life of the cannula.
• Reduces the the risk of medication errors

• Primary Gravity IV Set with 3 SafeLine Injection Sites.
• Universal Spike 
• Backcheck Valve
• SafeLine® Split Septum Injection Sites 88 in., 30 in. and 6 in. above Distal End
• Roller Clamp, Slide Clamp, SPIN-LOCK® Connector
• Latex-free, DEHP-free. 
• 15 drops/mL
• Priming Volume: 21 mL
• Length: 115 in. (292.1 cm)
• 50/case

• Primary Gravity IV Set
• 2 Non-Needle-Free Injection Sites
• 15 drops/m
•  Priming Volume: 17 mL
• Length: 84 in
• 50/case

• Primary Gravity IV Set
• Universal SpikeRoller Clamp
• Slide Clamp
• 2 Injection Sites at 82" & 6" Above Distal End
• SPIN-LOCK Connector
• 19mL Priming Volume
• 106"L
• 15 Drops/mL
• Latex Free
• 50/cs

Perifix LOR Syringes Design:

• B. Braun’s line of Loss of Resistance syringes are designed to provide consistent feel and smooth plunger action
• Consistent, reproducible feel time after time
• Smooth, low-friction plunger action
• Available in 8 mL plastic syringe
• Minimum order 3 boxes

•  Basic Admin Set
• Universal Spike
• Slide Clamp
• Injection Site 28" Above Distal End
• SPIN-LOCK Connector
• 12mL Priming Volume
• 66"L
• Minidrop 60 Drops/mL
• Latex Free
• 50/cs

• Universal Spike
• 15 drops/mL
• Roller Clamp, Injection Sites at 28"  and 6" above Distal End
• SPIN-LOCK® Connector
• DEHP-free, Latex-free.
• Priming Volume: 18 mL
• Length: 84 in. (213.4 cm)
• 50/case

Primary Gravity Set

• 15 drops/mL
• Priming Volume: 18 mL
• Length: 93 in
• 1 injecton site 26" above Distal End
• Universal spike
• Roller Clamp, Slide Clamp
• Latex-free, DEHP-free

Three-way with two female luer lock ports and male luer slip connector, Product code D201.

• with port covers
• DEHP-free and Latex-free.
• Priming volume: 0.26 mL
• 100 per box

• Secondary IV Set with SafeLine® Clip Lock Cannula, Plastic Bag Hanger 
• (15 drops/mL)
• Priming volume: 10 mL,
• Length: 49"
• 50/case

Primary Administration Set Addivtive

• 60 Drops / mL Drip Rate 
• 87" long
• 3 Ports/ Inj Sites
• Latex-free
• 50 per case

Anesthesia Extension Set with high-flow ULTRAPORT™ stopcock. B. Braun designed the needle-free ULTRAPORT series in response to growing concerns about stopcock contamination. Research shows that infection control measures in the anesthesia work area may help reduce infections. Disinfectable needle-free connectors are more effective than conventional caps in preventing the passage of microorganisms in the catheter lumen.

• High-Flow, four-way ULTRAPORT™ stopcock 
• Luer-activated ULTRAPORT port and female luer lock port
• 8 " (20.3 cm) extension tubing and SPIN-LOCK® connector.
• Priming volume: 1.5 mL.
• 100 per case
• Non-stock, lead time about 3 weeks

Sodium Chloride Injections USP are sterile, nonpyrogenic, isotonic and contain no bacteriostatic or antimicrobial agents. These intravenous solutions are indicated for use in adults and pediatric patients as sources of electrolytes and water for hydration.

• 0.9% Sodium Chloride Injection USP
• 50 mL Fill in 100 mL PAB, 84 per case
• 100 mL Fill in 150 mL PAB, 64 per case
• 15 months shelf life

Non-needlefree Intermittent Injection Cap IN2000. Intermittent Injection Cap - proximal injection port, clear body, distal male luer lock connector

• Priming volume: 0.2 mL.
• Length: 1.125" ( 2.9 cm)
• DEHP-free
• Latex-free
• 100/case

• Small Bore Extension Set
• Bonded ULTRASITE & Male Luer Lock Connection
• DEHP Free & Latex Free (LF)
• 0.61 and 0,95mL Priming Volume
• 8"L and 14" 
• 100/case
• Non-stock. lead time 10-12 days

• Microbore Extension Set with SafeLine Split Septum Injection Site.
• SafeLine® Split Septum Injection Site
• Removable Slide Clamp
• Microbore Tubing
• Male Luer Lock Connector
• Latex-free
• Priming Volume: 0.42 mL
• Length: 7" (17.8 cm)

• Female luer connector, injection site 4" above distal end
• Distal SPIN-LOCK connectior.
• Priming volume: 1.2ml
• Length 7.5" or 19 cm
• Contains no DEHP or natural rubber latex
• Non-stock 
• 50/case
• NON-STOCK ITEM

• Female luer connector
• Distal SPIN-LOCK connector.
• Priming volume 3ml
• Length 21" or 52.5 cm
• Contains no DEHP or natural rubber latex
• 50/case

Sodium Chloride Injections USP provide electrolytes and are a source of water for hydration. They are capable of inducing diuresis depending on the clinical condition of the patient.

0.9% Sodium Chloride Injection USP is indicated for extracellular fluid replacement, treatment of metabolic alkalosis in the presence of fluid loss and mild sodium depletion.

• 24-30 months shelf life
• 24 bags per case
• Not manufactured with latex, PVC or DEHP

Solid Air Freshener quickly absorbs odours and freshens the air with a lemon scent  using a unique formula that utilizes activated charcoal.

0.9% Sodium Chloride Injection USP is indicated for extracellular fluid replacement, treatment of metabolic alkalosis in the presence of fluid loss and mild sodium depletion.

• Not manufactured with latex, PVC or DEHP.
• Specific Gravity: 1.006
• Sold as individual bags 
• 12 bags per case

Dextrose Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. These intravenous solutions are indicated for use in adults and pediatric patients as sources of calories and water for hydration.

• 24 months shelf life
• Lactated Ringer isotonic fluid In an EXCEL IV Bag
• Not made with latex, PVC or DEHP
• 24 per case

• Infusomat® Space Pump IV Set
• 15 drops/mL
• Universal spike, pressure limited check valve
• 2 CARESITE luer access devices, roller clamp, slide clamp, backcheck valve
• SPIN-LOCK® connector.
• Priming volume: 22mL
• Length: 120" (305cm)
• Non-stock, non-returnable, lead time at least 2 weeks

Introcan Safety® 3 Closed IV Catheter, Polyurethane, Winged.  Fully automaticpassive safety peripheral IV catheter with needlestick and multiple access blood exposure protection that cannot be bypassed.

• Automatically control blood exposure
• Automatically prevents needlesticks
• Multiple access blood control
• Winged
• Universal Bevel Needle designed to produce a tricuspid incision for insertion
• Designed for a wide variety of insertion angles for deep and superficial vascular access
• Generate less waste with smaller, lighter components

• FEP catheter material
• Latex-free, PVC-free, DEHP-free
• Winged hub
• Safety-engineered
• Shelf life of sealed box, 5 years
• Box of 50

Dextrose Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration. These intravenous solutions are indicated for use in adults and pediatric patients as sources of calories and water for hydration.

Not made with natural rubber latex, PVC or DEHP.

• 100 Fill in 150 mL PAB®
• 64 minibags per case

SAFELINE® is a needle-free system that utilizes split septum technology similar to that of a conventional needle system.
A blunt plastic cannula replaces the standard needle, to provide needle-free safety while requiring little or no change in existing protocol or IV procedures. 

• Designed to eliminate accidental needlesticks
• Provides a swabbable injection site that is a closed system, accessed by inserting a cannula.
• Designed to ensure a safe, secure connection with Clip Lock cannula

Compatible with IV fluids, including blood and lipids, 

• Male luer lock connector
• Components do not contain DEHP or natural rubber latex.
• Priming volume 0.25ml

Because each patient presents a unique anatomical condition, precision and versatility are equally important in epidural procedures.

With Perifix® epidural needles, along with an extensive selection of sizes, styles and features to meet any application, you are also assured meticulous construction and reliability.

Perifix needles design feature:

• Precision ground, matched stylets to help reduce the risk of tissue coring
• Convenient 1cm depth markings making it easier to observe and control the exact depth of insertion
• Polished inner bevel to smooth the edge and help minimize the risk of catheter shearing
• Clear polycarbonate hubs to offer easy visualization of blood or CSF
• Fixed wings on most needles providing a stable surface for your fingers
• Hourglass-shaped, ridged hub, offering ergonomic placement of your fingers
• Minimum order 2 cases

*** THIS  PRODUCT  HAS BEEN DISCONTINUED ***

Huber Infusion Set Whin®, non-Safety, 

• 22G X 0.75"
• 7" Tubing Without Port
• 90° huber needle
• Female luer connector, on/off clamp,
• DEHP-free and latex-free 
• Priming volume: 0.25 mL
• 20 per case